Installing Sensors in the Home

SENSOR #1

In addition to monitoring an appliance, Sensor #1 connects all three sensors to the Evermind notification system. Sensor #1 should be plugged in first and must remain plugged in for Sensors #2 and #3 to function.

Determine the first appliance you want to monitor, and then follow these steps:

     
  1. Unplug the appliance from the outlet. 
  2. Plug Sensor #1 into the outlet, then plug the appliance into Sensor #1. 
  3. The light on the front of the sensor will blink while it connects to the Internet, and then become solid when connected (this may take up to 5 minutes). Check to see that Sensor #1 glows with a solid blue light. 
  4. Make note of appliance name and room name. You will need this to complete your system setup on the Evermind website: https://manage.evermind.us


Installing Additional Sensors (Optional)

SENSOR #2 & #3

Follow the same steps to set up Sensors #2 and #3. The lights on these sensors may blink while first connecting to Sensor #1 and will remain solidly lit when connected. Remember to make note of the appliance name and room name. You will need this to complete your system setup on the Evermind website: https://manage.evermind.us